How Do I Know My NFC Product Was Programmed Correctly?

Use This Quick Setup Check

After programming your Review⚡️Zaps Card or Stand, test it before using it with customers.

1. Confirm NFC Tools Completed the Write

NFC Tools should confirm that the write was successful. Simply entering your review link into the app is not enough. The link must actually be written to the NFC tag.

2. Test the Product Normally

Leave the NFC Tools writing screen, wake and unlock your phone, then Tap the Review⚡️Zaps Product the same way a customer would.

Your phone should detect the NFC tag and allow you to open the saved link.

3. Confirm the Correct Google Review Page Opens

Make sure the link leads to the correct business and location.

If you want to verify the destination before programming, use our free Google Review Link Generator and select TEST MY LINK.

4. Test More Than Once

Tap the product several times to make sure the result is consistent. If possible, test it with a second NFC-compatible phone as well.

5. Keep the Tag Unlocked Until You Are Certain

Do not permanently lock the NFC tag until you have confirmed that the correct page opens reliably.

Once a tag is permanently locked, it cannot be erased or rewritten. See How to Permanently Lock the Link on Your NFC Product before using that option.